Quanmax QDSP-2070 - Chapter 2 Getting Started; Setting up Your PC; Figure 4 Connect the DVI Cable

Chapter 2
20
QDSP-2070 User’s Manual
DVI-I
Chapter 2
Getting Started
 Setting up your PC
 Connect the DVI-I
Connecting the monitor
Connect the DVI-I cable from your display to the DVI-I port.
Figure 4 Connect the DVI cable
NOTE
When the system reboots without connecting the DVI, there might be no
image on screen when you insert the DVI cable. Please
pressing <Ctrl>+<Alt>+<F4> simultaneously to show the image on screen.