15
QUANTEX GmbH 2014
Code and error name
The scanner reads out the error code and decodes it. An error can have number-
ing assigned by the manufacturer or by the OBD-II standard. The OBD-II standard
also admits codes, assigned by a manufacturer. These codes start from the number
P1000.
Errors in accordance with OBD-II standard:
Symbols Description
P
P - Powertrain.
B - Body.
C - Chassis.
U - Communication.
0
0 - Codes are assigned by the OBD-II standard.
1 - Codes are assigned by the manufacturer.
1 System or car component code.
1 Error code.
2 Error code.
Some manufacturer’s standards involve the error digital value.
To Next Page
Loading...