Safety
quantum
MASCHINEN - GERMANY
© 2007
GB
Page 4 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5 18 / 01 / 2008
1 Safety
Glossary of symbols
This part of the operating manual
• does explain the meaning and how to use the warning references contained in this operating
manual,
• does explain how to use the drilling machine,
• highlights the dangers that might arise for you and others if these instructions are not fol-
lowed thoroughly,
• informs you on how to prevent dangers.
In addition to this operating manual, please note
• applicable laws and regulations,
• legal regulations for preventing an accident,
• the prohibition, warning and mandatory signs as well as the warning notes on the drilling
machine.
European standards must be kept during installation, operation, maintenance and repair of the
drilling machine.
If European standards are not applied at the national legislation of the country of destination, the
specific applicable regulations of each country are to be observed.
If necessary, the required measures must be taken to comply with the specific regulations of
each country before the drilling machine is used for the first time.
Always keep the operating manual close to the drilling machine for further reference.
INFORMATION
If you are not able to solve a problem using this manual, please do not hesitate to contact us for
further professional advice:
Optimum Maschinen Germany GmbH
Dr. Robert-Pfleger-Str. 26
D- 96103 Hallstadt
info@optimum-maschinen.de
gives further advice
calls on you to get in action
• enumeration
notice
To Next Page
Loading...
Need help?
General
