quantum
MASCHINEN - GERMANY
Safety
© 2007
GB
Page 718 / 01 / 2008 Version 1.2.5 B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine
WARNING!
Very serious injury.
It is forbidden to make any modifications or alternations to the operating values of the
drilling machine! They could endanger employees and cause damage to the drilling
machine.
1.3 Possible dangers caused by the drilling machine
The drilling machine is state of the art.
Nevertheless, there is a residual risk as the drilling machine operates with
• high revolutions,
• rotating parts,
• electrical voltage and currents.
We have used construction resources and safety techniques to minimize the health risk to per-
sons resulting from these hazards.
If the drilling machine is used and maintained by employees who are poorly qualified, then there
might be a risk resulting from incorrect operation and unsuitable maintenance of the drilling
machine.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must
• be duly qualified,
• strictly follow this operating manual.
Due to improper use
• there is a risk for the employee,
• the machine and further property might be endangered,
• the function of the drilling machine could be affected.
Always disconnect the drilling machine if cleaning or maintenance work is being carried out.
WARNING!
The drilling machine may only be used with the safety devices activated.
Disconnect the drilling machine immediately whenever you detect a failure in the safety
devices or when they are not mounted!
All additional installations carried out by the operator must incorporate the safety
devices prescribed.
This is your responsibility being the operator!
„Safety devices“ on page 9
To Next Page
Loading...
Need help?
General
