quantum
MASCHINEN - GERMANY
© 2007
GB
Page 59Stand 18 / 01 / 2008 Version 1.2.5 B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine
8.7 EC - declaration of conformity
The manufacturer/
retailer:
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt
hereby declares that the following product,
type of machine: bench drill
pillar drill
designation of machine: B13, B14, B16, B20, B20
Vario, B25, B25 Vario, B32,
B32 Vario
relevant EU directives:
machine directives 98/37/EG, Appendix II A
EMV- directive 89/336/EWG
low voltage directive 73/23/EWG
meets the provisions of the aforementioned directive, including any amendments valid
at the time of this statement.
In order to ensure conformity, the following harmonized standard in particular have
been applied:
EN 12717: 2001 Safety of machine tools, drilling machines
EN 62079 Editing of instructions - structure, content and illustra-
tion (IEC 62079:2001)
Hallstadt, 18 / 01 / 2008
Kilian Stürmer
(Manager)
Thomas Collrep
(Manager)
To Next Page
Loading...
Need help?
General
