Safety
quantum
MASCHINEN - GERMANY
© 2007
GB
Page 6 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5 18 / 01 / 2008
1.1.2 Further ideograms
1.2 Proper use
WARNING!
In the event of improper use, the drilling-milling machine
• will endanger personnel,
• will endanger the machine and other material property of the operator,
may affect proper operation of the drilling machine.
The drilling machine is constructed and designed for the use in non-explosive surrounding. The
drilling machine is designed and manufactured to be used for drilling cold metals or other non-
flammable materials or materials that do not constitute a health hazard by using a rotating cut-
ting tool with various chucking grooves.
If the drilling machine is used in any way other than as described above, modified without the
authorisation of Optimum Maschinen GmbH or operated with different process data, then it is
being used improperly.
We do not take liability for damage caused by improper use.
We would like to stress that any modifications to the construction, or technical or technological
modifications that have not been authorised by Optimum Maschinen GmbH will also render the
guarantee null and void.
It is also part of proper use that
• the maximum values for the drilling machine are complied with,
• the operating manual is observed,
• inspection and maintenance instructions are observed.
„Technical Data“ on page 14
Warning of auto-
matic start-up!
Activation forbid-
den!
Pull the main plug! Use safety
glasses!
Use ear protec-
tion!
Use protective
gloves!
Use protective
boots!
Wear a safety suit! Protect the envi-
ronment!
Contact address
To Next Page
Loading...
Need help?
General
