Quantum Scalar i40 Quick Start Guide

Installing TLS Certificates on the SKM Server for SKM 2.4 (240Q) or Later 37
Scalar Key Manager 2.5
2 Onscreen messages provide status as the Quantum certificate bundles are generated
using the default values, so no user input is required. (The generated bundle files are
saved at
/home/akmadmin/generatedcerts/qbundles.)
After bundle generation is complete, load the bundles listed on the screen onto the
library and SKM servers using the user interface.
•The TapeLibraryQKMCert_xxxxxxxxxx.tgz bundle may be loaded onto any
library attached to the SKM server pair.
•The QKMPrimaryServerCert_xxxxxx.tgz bundle must be loaded onto the
primary SKM server.
•The QKMSecondaryServerCert_xxxxxxx.tgz bundle must be loaded onto the
secondary SKM server.

Quantum Scalar i40 Specifications

General

Power requirements	100 - 240 V AC, 50 - 60 Hz, 2.8/1.4 Amps
Power consumption (typical)	100 W
Expansion slots	25
Dimensions (WxDxH)	455 x 793 x 132 mm
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Product type	Storage auto loader & library
Product color	Black

Weight and Dimensions

Weight	15800 g