Quantum Scalar i40 Quick Start Guide

4 Installing and Configuring the SKM Appliance Servers
Quantum Scalar Key Manager 2.5 Quick Start Guide
Figure 1 SKM Appliance Server
Rear Panel
The rear of your server looks like one of the drawings below.
4 Observe the power-on LED on the front panel (see Figure 2). Wait until the power-on
LED blinks slowly to indicate that the power button is active.
If the power-on LED is not blinking, there could be a problem with the power supply
or the LED. Check the power connection. If this LED still does not blink, contact
Quantum Support.
Power cord
connector
Ethernet Port 1
(configuration)
Ethernet Port 2 
(network)
Power cord
connector
Ethernet Port 1
(configuration)
Ethernet Port 2 
(network)
M2 and earlier
M3 and M4
Power cord
connector
Ethernet Port 1
(configuration)
Ethernet Port 2 
(network)
M5
Power cord
connector
Ethernet Port 2
(network)
Ethernet Port 1 
(configuration)
M6

Quantum Scalar i40 Specifications

General

Power requirements	100 - 240 V AC, 50 - 60 Hz, 2.8/1.4 Amps
Power consumption (typical)	100 W
Expansion slots	25
Dimensions (WxDxH)	455 x 793 x 132 mm
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Product type	Storage auto loader & library
Product color	Black

Weight and Dimensions

Weight	15800 g