Quantum Scalar i6000 Quick Start Guide

QUANTUM SCALAR I6000 & SAFENET KEYSECURE QUICK START GUIDE 21
Step 6: Install the Encryption Key Management License
To install the encryption key management license:
1 Log on to the Scalar i6000 library as an administrator, if you are not currently viewing the physical
library.
2 Click Setup > Licenses.
The Licenses dialog box appears.
This dialog box lists the licensed features for your library, plus Status, Expiration, and Quantity.
Quantity refers to the number drives licensed to use this feature.
3 In the Enter License Key box, type the appropriate license key.
- License keys are not case sensitive and are all-inclusive. For example, J2BGL-22622-52C22 can be
entered as j2bgl-22622-52c22.
- If you are using the library’s touch screen, enter the library key from the lowercase keyboard, which
gives you access to the dash (-) character.
- If you cannot locate the license keys shipped with the library, you can obtain them by contacting
technical support or, if you are an end user, by contacting your inside sales representative.
4 Click OK.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing