QUANTUM SCALAR I6000 & SAFENET KEYSECURE QUICK START GUIDE 10
r Press 1 and press Enter.
SETTING USER PIN...
N value? (M-16)...
>00
s Press 1 and press Enter.
SETTING USER PIN...
Insert a USER / Partition Owner PED Key. Press ENTER.
t Insert the User/Partition (black) iKey and press Enter.
SETTING USER PIN...
Enter new PED PIN:
u Enter a PIN value.
SETTING USER PIN...
Confirm new PED PIN:
v Confirm the same PIN value.
SETTING USER PIN...
Are you duplicating this keyset? (Y/N)
w Press No.
USER LOGIN...
Insert a USER / Partition Owner PED Key. Press ENTER.
x Keep the User/Partition (black) iKey inserted in the PED and press Enter.
USER LOGIN...
Enter PED PIN:
y Enter the PIN for the User/Partition (black) iKey and press Enter.
The KeySecure CLI displays the following message:
Luna PED operation required to generate cloning domain on the
partition - use Domain (red) PED key.
The PED displays the following text:
SETTING DOMAIN...
Would you like to reuse an existing keyset? (Y/N)
z Press Yes. You will reuse the Domain (red) iKey you created above.
READING DOMAIN...
Insert a Domain PED Key. Press ENTER.
To Next Page
Loading...
