Quasar Palmcorder VM-D52 User Manual

12
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Using MENU Mode
Before you begin...
• Connect Camcorder to power source.
• Set POWER to CAMERA or VCR.
1 Press MENU for MENU mode.
The CAMERA or VCR MENU screen (see below
left) appears when Menu mode is entered.
2 Press UP or DOWN to highlight the
desired menu item.
3 Press DISPLAY to set selection.
4 Press MENU to exit.
Note:
• The Menu mode is canceled if
UP/DOWN,
DISPLAY, or MENU are not pressed within
5 minutes when Self Demo mode is off.
• The Menu mode is canceled if UP/DOWN,
DISPLAY, or MENU are not pressed within
30 seconds when Self Demo mode is on.
1
2
3
4
5
6
7
8
MENU Mode (VCR) Screen
MENU Mode (CAMERA) Screen
1 PROGRAMMED REC (page 18).
Camcorder starts and stops recording at a
preset time.
2 DISPLAY (page 29).
ON : On-screen Display (OSD) screens are
displayed.
3 SHUTTER (page 24).
Select desired shutter speed.
4 STAND-BY RELEASE (page 17).
ON : Enables quick resumption of recording
from Stand-by mode.
5 CLOCK SET (pages 13, 14).
Select to set clock.
6 LIGHT MODE (page 15).
ON/OFF : Light can be set ON or OFF.
ON/OFF/AUTO : Light can be set ON, OFF, or AUTO.
7 MOTIONSENSOR (page 28).
ON : Enables MotionSensor recording.
8 VIDEO EFFECTS (pages 25~26).
AUTO FADE : BLACK or WHITE
DIGITAL FADE : TYPE 7 types
COLOR
8 colors
5
2
1, 2, 3, 4
02.VM-D52 Getting p08-15 02.1.28, 9:56 AM12

Quasar Palmcorder VM-D52 Specifications

General

Brand	Quasar
Model	Palmcorder VM-D52
Category	Camcorder
Language	English