Quectel EC25 Mini PCIe - Dimensions and Packaging; Mechanical Dimensions of EC25 Mini PCIe

LTE Standard Module Series
EC25 Mini PCIe Hardware Design
EC25_Mini_PCIe_Hardware_Design 74 / 79
7 Dimensions and Packaging
7.1. General Description
This chapter mainly describes mechanical dimensions as well as packaging specification of EC25 Mini
PCIe module. All dimensions are measured in millimeter (mm), and the dimensional tolerances are
±0.05mm unless otherwise specified.
7.2. Mechanical Dimensions of EC25 Mini PCIe
10.35±0.10
34.30±0.20
4.00±0.10
48.05±0.20
6.35±0.10
2xΦ2.60±0.1
3x3.00±0.10
5.98±0.10
6.38±0.10
5.45±0.10
8.25±0.10
24.20±0.20
30.00±0.15
Pin1
Pin51
1.00±0.10
7.26±0.10
9.90±0.10
1.40±0.10
4.90±0.20
0.61±0.05
2.35±0.10
50.95±0.15
Top View
Side View
Figure 19: Mechanical Dimensions of EC25 Mini PCIe