LTE Standard Module Series
EC200x&EC600S&EG912Y Series PPP Application Note
EC200x&EC600S&EG912Y_Series_PPP_Application_Note 21 / 27
In the example above, the settings predefine a PDP context where CID=1, PDP type=IP and
APN=CMNET. CMNET is the APN of the network operator China Mobile and it should be replaced with
the value provided with the value defined by the network operator.
6.2.2. Dial-up Network Configuration
6.2.2.1. Create a New Connection
1. Open “Control Panel”, click “Network and Internet”, “Network and Sharing Center” and finally
“Set up a new connection or network”, as illustrated below.
Figure 10: Create a New Connection
To Next Page
Loading...
Need help?
General
