Quectel EM05

LTE Module Series
EC2x&EG9x&EM05 SMTP AT Commands Manual
EC2x&EG9x&EM05_SMTP_AT_Commands_Manual 9 / 31
+QSMTPCFG: "sender",<sender_name>,<sender_email>
OK
Write Command
AT+QSMTPCFG="smtpserver"[,<srva
ddr>,<srvport>]
Response
If <srvaddr> and <srvport> are not omitted:
OK
Or
+CME ERROR: <err>
If <srvaddr> and <srvport> are both omitted, query the current
settings:
+QSMTPCFG: "smtpserver",<srvaddr>,<srvport>
OK
Write Command
AT+QSMTPCFG="contextid"[,<conte
xtID>]
Response
If <contextID> is not omitted:
OK
Or
+CME ERROR: <err>
If <contextID> is omitted, query the current settings:
+QSMTPCFG: "contextid",<contextID>
OK
Write Command
AT+QSMTPCFG="sslctxid"[,<sslctxID
>]
Response
If <sslctxID> is not omitted:
OK
Or
+CME ERROR: <err>
If <sslctxID> is omitted, query the current settings:
+QSMTPCFG: "sslctxid",<sslctxID>
OK
Write Command
AT+QSMTPCFG="ssltype"[,<ssltype>
]
Response
If <ssltype> is not omitted:
OK
Or
+CME ERROR: <err>
If <ssltype> is omitted, query the current settings:
+QSMTPCFG: "ssltype",<ssltype>
OK