Need help?Do you have a question about the Quectel EC21-AU and is the answer not in the manual?
General| Category | LTE Module |
|---|---|
| Frequency Bands | B1/B3/B5/B7/B8/B28/B40 |
| LTE FDD | B1/B3/B5/B7/B8/B28 |
| LTE TDD | B40 |
| Max Data Rate (DL) | 10 Mbps |
| Max Data Rate (UL) | 5 Mbps |
| Operating Temperature | -40°C to +85°C |
| Form Factor | LCC |
| Storage Temperature | -45°C to +90°C |
| SIM Interface | 1.8V/3.0V |
| Module Type | LTE Cat 1 |
| LTE Category | Cat 1 |
| GSM | 900/1800 MHz |
| Interface | USB 2.0 |
| GNSS | GPS/GLONASS/BeiDou |
| Operating Voltage | 3.3V |
| Protocols | TCP/UDP |
| Certifications | CE, FCC, GCF |
Details crucial safety precautions for operating and maintaining the module.
Illustrates module pin layout and defines each pin's function and characteristics.
Details procedures and scenarios for reducing the module's current consumption.
Covers power supply pins, voltage stability, and monitoring methods.
Explains module power control, turn-on/off, and reset mechanisms.
Describes the USB 2.0 interface capabilities, pin definitions, and reference circuit.
Details the main and debug UART interfaces, their features, and pin definitions.
Covers antenna interfaces, frequency bands, Tx power, and Rx sensitivity.
Lists the absolute maximum ratings for power supply and voltage on module pins.
Details the voltage and current ratings for the module's power supply.
Specifies the operating and storage temperature ranges for the module.
Provides detailed current consumption values for various operating states and modes.
Provides the physical dimensions and tolerances of the EC21 series module.
To Next Page