Quectel SC20 Series - Page 52

Smart Module Series
SC20_Series_Hardware_Design 51 / 133
6
GPIO_68 and GPIO_88 cannot be pulled up during start-up.
7
As for SC20-CE R1.1/-CEL R1.1, SC20-E/-EL, SC20-A/-AL, SC20-AU/-AUL, SC20-J/-JL, SC20-EU, pins 105, 116, 117,
118 and 119 are GPIO_0, GPIO_11, GPIO_10, GPIO_9 and GPIO_8 respectively; as for SC20-AX, SC20-EX, pins 105,
116, 117, 118 and 119 are GPIO_15, GPIO_3, GPIO_2, GPIO_1 and GPIO_0 respectively.
79 CAM0_RST GPIO_35 B-PD: nppukp Wakeup
80 CAM0_PWD GPIO_34 B-PD: nppukp Wakeup
81 CAM1_RST GPIO_28 B-PD: nppukp Wakeup
82 CAM1_PWD GPIO_33 B-PD: nppukp
83 CAM_I2C_SCL GPIO_30 B-PD: nppukp
84 CAM_I2C_SDA GPIO_29 B-PD: nppukp
90 GPIO_32 GPIO_32 B-PD: nppukp
91 SENSOR_I2C_SCL GPIO_7 B-PD: nppukp
92 SENSOR_I2C_SDA GPIO_6 B-PD: nppukp
93 UART2_RX GPIO_5 B-PD: nppukp Wakeup
94 UART2_TX GPIO_4 B-PD: nppukp
95 KEY_VOL_UP GPIO_90 B-PD: nppukp Wakeup
96 KEY_VOL_DOWN GPIO_91 B-PD: nppukp Wakeup
97 GPIO_31 GPIO_31 B-PD: nppukp Wakeup
98 GPIO_92 GPIO_92 B-PD: nppukp Wakeup
99 GPIO_88
6
GPIO_88 B-PD: nppukp
100 GPIO_89 GPIO_89 B-PD: nppukp
101 GPIO_69 GPIO_69 B-PD: nppukp
102 GPIO_68
6
GPIO_68 B-PD: nppukp
103 GPIO_97 GPIO_97 B-PD: nppukp Wakeup
104 GPIO_110 GPIO_110 B-PD: nppukp Wakeup
105
7
GPIO_0 GPIO_0 B-PD: nppukp