Need help?Do you have a question about the Quectel SG368Z-AP and is the answer not in the manual?
General| Brand | Quectel |
|---|---|
| Model | SG368Z-AP |
| Category | Control Unit |
| Language | English |
Details the power supply requirements and reference designs for the module.
Details the USB 2.0 and USB 3.0 interfaces and their configurations.
Details the SD card interface compliant with SD 3.0 specifications.
Describes the UART interfaces, features, and pin configurations.
Covers the I2C interfaces, including bus master mode and data rates.
Details the I2S interfaces, supporting various bit rates and sampling rates.
Describes the PDM interface for digital audio input.
Covers analog audio inputs and outputs, including microphone and speaker interfaces.
Details the Embedded DisplayPort (eDP) interface specifications and pinout.
Covers the HDMI 2.0 interface, including resolution and data rate support.
Describes the Liquid Crystal Monitor (LCM) interfaces, including MIPI DSI.
Details the camera interface based on MIPI CSI standard, supporting multiple cameras.
Describes the I2C interface for connecting a touch panel.
Details the two PCIe interfaces (PCIe 2.0 and PCIe 3.0) and their configurations.
Explains the RGMII interfaces for Gigabit Ethernet connectivity.
Details the shared antenna interface and frequency bands for Wi-Fi and Bluetooth.
Defines the extreme limits for voltage parameters to avoid damage.
Specifies the voltage and current ratings for the module's power supply.
Details the power consumption of the module in various modes and conditions.
Defines the voltage levels and characteristics for the module's digital I/O pins.
To Next Page