Quest Engineering 215 Dual User Manual

Installation, Operation and Maintenance Instructions
This manual is provided to acquaint you with the dehumidi-
fier so that installation, operation and maintenance can
proceed successfully. Ultimate satisfaction depends on the
quality of installation and a thorough understanding of this
equipment. The dehumidifier is built around tested engi-
neering principles and has passed a thorough inspection for
quality of workmanship and function.
Quest Dry
Installation, Operation and Maintenance Instructions
4201 Lien Rd
Madison, WI 53704 Toll-Free 1-877-420-1330
www.QuestHydro.com info@QuestHydro.com
– Read and Save These Instructions –
Specifications subject to change without notice.
1
Quest 215 Dual
Water Removal Rates (Pints/Day)
215 pints 80˚F, 60% (AHAM) (215 Dual)
PATENTS:
D570,988
8,069,681
9,052,132
The Quest 215 Dual is the largest capacity of the group. This
unit removes up to 215 pints of water per day using only 6.9
amps/230V. Ideally suited for commercial gardens and green
houses.
Features:
• Industry-leading efficiency, most efficient on the market
today
• Patented, optimized air-to-air heat exchanger
• High-efficiency, long-life impeller fan
• Quiet operation
• Superior air filtration (MERV-11 standard)
• Auto-restart after power outages
• Environmentally friendly R410A refrigerant
• Low voltage control
TS-929
12/15

Quest Engineering 215 Dual Specifications

General

Brand	Quest Engineering
Model	215 Dual
Category	Dehumidifier
Language	English

Summary

Safety Precautions

Intended Application

Registrations

Specifications

Installation

Location

Details on selecting the optimal placement for the dehumidifier unit.

Electrical Requirements

Critical information regarding power supply and wiring for the unit.

Condensate Removal

Procedures and options for draining collected water from the unit.

Install Diagram

Visual guide illustrating the installation layout and connections.

Ducting

Information on connecting ductwork for air intake and exhaust.

Supply Duct Kit

Details on the optional kit for supply air ducting.

Return Duct Kit

Details on the optional kit for return air ducting.

Controls

Optional Dehumidifier & Ventilation System Controller

Maintenance

Standard Air Filter

Guide for checking, cleaning, and replacing the standard air filter.

High Efficiency Air Filter

Information on the optional high-efficiency filter and its use.

Impeller Fan Oiling

Instructions for fan motor lubrication; typically not required.

Optional Fresh Air Return

Maintenance for the screen on the fresh air intake.

Service

Warranty

Information regarding the product's warranty coverage and claims.

Technical Description

Explanation of the refrigeration system's operational principles.

Troubleshooting

Common issues and solutions for operational problems.

Refrigerant Charging

Procedures for accurately weighing and charging refrigerant.

Impeller Fan Replacement

Step-by-step guide for replacing the impeller fan assembly.

Compressor/Capacitor Replacement

Instructions for replacing the compressor and associated capacitor.

Remote Controls

Operation and troubleshooting for remote control units.

Defrost Thermostat

Function and troubleshooting of the defrost thermostat.

Electric Ventilation Damper

Operation and troubleshooting of the electric ventilation damper.

Condensate Pump Kit

Information on the optional condensate pump and its safety switch.

Electric Schematics

Service Parts List

Optional Parts List

Warranty