EasyManuals Logo
Home>Quest Engineering>Control Panel>DEH 3000

Quest Engineering DEH 3000 User Manual

Quest Engineering DEH 3000
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
quest
quest
1-800-533-7533
Quest DEH 3000 Installation, Operation and Maintenance Instructions
12
www.QuestProtect.com
sales@questprotect.com
Youcanselectfrom:
MON-FRI”“SAT-SUNforseparateweekdayandweekendschedules,orMON-SUNwhichgivesyouequal
weekdayandweekendschedules.
3.UsingtheUp/DownRH”buttons,highlightandthenselectoneofthetwochoices.Theexamplegivenshows
howtoprogramseparateweekdayandweekendschedules.Thesamemethodisusedifyouchoosetheother
program.
Example:menuwhenyouselectMON-FRI”“SAT-SUN”:
1.Enterthestartingtimeforweekdaysusingtheup/downRH”buttonstochangethetime.
2.PressthePROGRAM ENTER”buttontoswitchtotheOPEN FORsetting.Usingtheup/down“RH”buttons,
changethedurationthatthedamperwillventilatefreshair.
3.PressthePROGRAMENTERbuttontoswitchtothe“CLOSEDFOR”setting.Usingtheup/downRH”
buttons,changethedurationthatthedamperwillremainclosedbetweenventilationcycles.
Fortheexamplegiven,startingat8:00AMinthemorning,thecontrolwillventilatefreshairfor15minutesthen
stopfor15minutes.Thisscheduleof15minutesopen,15minutesclosedwillcontinueuntilthestarttimeofthe
nightschedule.
Morningscheduleisavailableanytimefrom12:00AMuntil11:59AM.
Nightscheduleisavailableanytimefrom12:00PMuntil11:59PM.
4.Press“PROGRAMENTERagaintogototheMON-FRInightschedule.Repeatthestepslistedaboveforthis
andtheSAT-SUNdayandnightschedules.
Whenyouhavenishedprogrammingyourschedule(eitherthe7-dayversionortheweekday/weekendsplit
version),usethedown“RH”buttontohighlighttheEXIToptionandthenpressPROGRAM ENTER”toselectit.
RunningtheVentilationProgram
PressandholdthePROGRAM ENTER”buttonuntilthe“PROGRAMscreenappears.
UsethedownRHbuttontohighlightRUN PROGRAM:
ThenpressPROGRAMENTERtoselectit.Thedisplaywillappearas
follows:

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Quest Engineering DEH 3000 and is the answer not in the manual?

Quest Engineering DEH 3000 Specifications

General IconGeneral
BrandQuest Engineering
ModelDEH 3000
CategoryControl Panel
LanguageEnglish

Related product manuals