To Next PageTo Next Page
Need help?Do you have a question about the Quest Engineering DEH 3000R and is the answer not in the manual?
General| Brand | Quest Engineering |
|---|---|
| Model | DEH 3000R |
| Category | Control Panel |
| Language | English |
Steps to physically mount the control panel and its back panel.
Instructions for installing the optional remote sensor package.
Guidelines and best practices for using the remote sensor.
Details on routing and connecting wires for the remote sensor.
Critical warnings and instructions for wiring the control panel.
How to use the relay for coordinating fan operation with the dehumidifier.
Setting up the A/C sensor feature for automatic dehumidifier control.
Details on relay terminals (NC, COM, NO) and their functions.
Standard wire colors for thermostats and terminal codes.
Wiring for activating/deactivating dehumidification with AC operation.
Steps to verify wiring connections and confirm proper hook-up.
Testing fan-only operation and optional vent operation.
Describes what is shown on the control panel display screen.
How to adjust settings and how the control remembers changes.
A table to record custom function settings.
How to turn the system ON/OFF and what is displayed in each state.
Step-by-step instructions for setting the device's clock.
How to set the desired relative humidity level for dehumidification.
How to select between continuous or automatic fan operation.
Controls ventilation using damper modes: OPEN, CLOSED, or PROGRAMMED.
How the system operates fresh air ventilation based on a programmed schedule.
Steps to set up weekday/weekend and day/night ventilation schedules.
How to activate and view the programmed ventilation schedule.
Setting a temperature limit to disable operations.
