EasyManua.ls Logo

Quick MILL Apollo EVO - Page 12

Quick MILL Apollo EVO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mod. 060 Apollo EVO EVOpid Rev. 02
when the display shows “t2” push the button to change the time setted before.
the display shows the time. It is possible to change it through the buttons and to the wished
value (range 00.0 - 99.9 step 0.1)
after 3 seconds you have pushed the last button the data is stored and the display shows again “t2”
to esc the programming mode just wait for 3 seconds (automatic esc)
6. CLEANING, REPAIRING OR MAINTENANCE WORK
Before carrying out cleaning, repairing or maintenance work on the coffee grinder disconnect the plug from
the socket.
6.1 REPAIRING AND MAINTENANCE
Do not open the coffee grinder, in the event of faults which involve repairs or maintenance, contact a QUICK
MILL authorised Technical Service Centre only. The manufacturer shall not be held liable for inadequate
operations.
6.2 CLEANING
Before carrying out cleaning always disconnect the plug from the socket. Remove the coffee bean container
(when it is empty) by turning it to the left. The container can be washed (not in a dishwasher). However, it
needs to be completely dry before refitting it. Remove any residual coffee powder from the three catch
grooves on the head of the mechanism. Once the container is removed the head of the mechanism and
graduated ring can also be removed, by turning to the left, anti-clockwise, for around 6 turns (Fig. 4). Now
you can clean any grinding residue, using a clean dry brush, and possibly a toothpick (never use metal
objects) Never use water to clean any of the parts related to the motor.
7. STORAGE AND DISPOSAL
If the grinder is not going to be used for a long time, remove the plug from the socket, keep it away from
atmospheric agents (dust, dirt, etc.) storing it in a safe place out of the reach of children. If you decide not to
use the appliance any longer, it is advisable to make it unusable by cutting the power supply cord after
unplugging it. If possible store the product in its original packaging.
8. FAULT
Fault
Solution
Coffee grinder does not work
(go on)
Plug in the machine
Check the fuses
.
WARRANTY CONDITIONS
1- The apparatus is warranted for a period of 12 months after date of purchase that must be supported from
a fiscal document issued by the authorized retailer. The Warranty Certificate” must state identifying
characteristics of the product and retained with the fiscal document.
2- The warranty applies only to faults caused by defective components due to faulty manufacturer
workmanship. These components will be repared and remplaced free of charge.
3- For irreparable faults or continually same faults, unobjectionably recognized by QUICK MILL srl, the
apparatus itself will be replaced. The warranty on the new apparatus will be valid till the primary contract is
expired.
4- The warranty does not cover failures caused by neglect, misuse (use contrary to operating instructions),
incorrect installarion or maintenance, repair by an unauthorized “customer technical Service”, accidental
damage transport or otherwise. The warranty does not cover any service required for installation connection
to the power supply system and any maintenance stated in the “Instructions Booklet”.
5- The warranty does not apply to any improper use of the apparatus, especially in not domestic use.
6- QUICK MILL srl shall be under no liability for any damage directly or indirectly caused to people, things
and animals due to non-observance instructions given in the “Instructions Booklet”, above all any warning
concerning installation, use and maintenance of the apparatus.
7- “Contribution for travelling expenses to purchaser’s door”, according to the fare in force at the time of
service are to pay when apparatus require service at purchaser’s. Risk and transport charges in case of
direct dispatch to “authorized customer technical Service” are at user’s charge.
8- This warranty is given under the Italian law and is valid only in Italy.In the other countries terms and
conditions can be different according to the local law anyway our international agreement include the
transfer of the responsability for warranty by the importers or dealers in the specific country. We suggest the
customer to verify that the varranty issue from the retailer are according to the local law.

Related product manuals