249
Coffee brew
1. Remove the filter (c) holder from its seat, turning it clockwise.
2. Fill the filter with one or two doses of coffee (according to the filter inserted);
3. Press the coffee with the presser.
4. Place the filter holder to its seat, turning it anti-clockwise.
5. Place the cups under the corresponding outlets under the filter holder.
6. Lift the coffee delivery lever (b) after a few seconds the coffee starts to brew.
When the desired amount of coffee has been delivered, lower the group
lever.
Boiler temperature adjustment
The boiler temperature management is carried out by means of a dedicated PID;
for the settings, please refer to "SETTING AND THERMOPID OPERATION"
model CAROLA. For the CAROLA PID model refer to the chapter "THERMOPID
OPERATION AND PROGRAMMING" in the "SINGLE TEMPERATURE
TERMOPID" section.
To Next Page
Loading...
Need help?
General
