341
9. POSSIBLE PROBLEMS
If the power supply cable becomes damaged, contact an
authorised after sales service, because a special tool is
necessary.
Waste materials used for processing or maintenance, if they are not bio-
degaradable or cause pollution, are to be placed in separate containers and
handed over to the specific collection centres.
Checking operations that can be carried out by the user after disconnecting the
electric power supply:
•
The machine does not start:
1. Ensure the plug is inserted correctly.
2. Ensure there is mains power and the residual current device or circuit
breaker is inserted.
3. Check the condition of the plug and the power supply cable; if damaged
have them replaced by qualified personnel.
•
No coffee is delivered:
1. No water in the reservoir, refill with water.
2. The pump has overheated due to excessive use. Wait for the pump to
cool down and the thermal protector to reset.
To Next Page
Loading...
Need help?
General
