Quick AC Series - 产品维护 Maintenance

P/N:20760050033-A
~ 21 ~
5. 产品维护 Maintenance
 准备工具 Prepare tools
表 5-1 维护工具 (Table 5 -1 Malignance Tools)
序号//No.
工具 Tools
1
万用表//Multimeter
2
十字螺丝刀//Phillips screwdriver
3
一字螺丝刀//Slotted screwdriver
 日常维护 Routine maintenance
表 5-2 日常维护(Table 5 -2 Routine maintenance)
序号
No.
检测项目
Check items
检验方法
Check methods
故障解决方法
Solution
1
电源线牢固性
Power line firm
1、关闭空调输入电源。
Turn off the supply power
2、用手拉动电源线，观察是否有松脱现象。
Pulled the power line，watch whether the line
is loosening
3、用螺丝刀拧动电源线端子上的螺丝，观察
是否有松动现象。Screw the screws on the
power cord terminals with a screwdriver,
watch whether the screw is loosening
若发现有电源线有松脱或者松
动现象，应重新用扎带绑紧电
源线；用螺丝刀将松动的螺丝
拧紧。If there is a power line
to loose or loosening, You
should be used to tie tight
power line; use a screwdriver
to loose screw.
2
电压稳定性
Voltage Stability
用万用表测量空调输入电压，观察用电压是否
在正常范围内
Use the multimeter to measure air conditioner
input voltage to watch whether the voltage is
within normal range.
若电压不在正常供电范围，请
立刻关闭输入电源。直到输入
电源稳定后才可再次运行空
调。If the voltage is not within
the normal range, Please turn
off the power supply
immediately. Power on the air
conditioner until the supply
voltage within normal range.
3
安装螺丝牢固性
Screw firmly
用螺丝刀拧动空调的安装螺丝，观察是否有松
动现象。Use screwdriver to screw the screws
and watch whether the screw is loosening
若有松动现象，则拧紧螺丝
If the screw is loosening,
please tighten it.