DK Series
EN
DK Series
QUICK DKSeries INSTALLATION AND USER’S MANUAL - REV005A
6
2.0 - Standard supply and material included in the package
• Windlass (top+gearmotor)
• Reversing contactor box (DK 3000W) / reversing contactor box (DK 3500W) (DC electric motor only)
• Lever
• Screws for assembly
• Installation and user’s manual, Warranty
• Drilling template
2.1 - Tools required for installation
DK Series
• Drill with bit: Ø 15 mm (19/32”)
• Hollow mill Ø 40 mm (1” 9/16)
• Hex wrench: 13 mm
2.2 - Recommended Quick
®
accessories not included
• Control from control board
• Diverter from panel
• Waterproof push-button panel
• Foot-operated switch
• Hydraulic-magnetic circuit breaker
• Anchor chain counter
• Control system via RRC radio
2 - Supply and equipment
GYPSY* 12/13 mm 14 mm / 1/2” 16 mm 12.5 mm
CHAIN SIZE
12 mm 13 mm 7/16” 14 mm 14 mm 1/2” 16 mm 16 mm 12.5 mm
ISO DIN 766 G4 DIN 766 ISO (**) G4 DIN 766 ISO (**) STUD-LINK
(*) For gypsy codes, see the exploded drawing on page
(**) ISO EN 4565
1 - Information about the product
XR7 XR8 XR9
TIGHTENING TORQUE
Nm
M6 6.5
M8 16
M10 31
M12 55
M14 87
M16 135
Indicative values for stainless steel screws, consider tightening by
assessing the material of the surface to which it will be xed.
To Next Page
Loading...
