Quick RDS 1562 - Beep Alert; Lcd Contrast

27
EN
RDS 1562 - IT EN - REV001A
PROGRAMMING
BEEP ALERT
BEEP ALERT
It allows to enable or disable the acoustic signaling in presence of warning
messages or manual reset errors
ON WARNINGS
ON ERRORS
EXIT
ON WARNINGS
It allows to enable or disable the acoustic signaling (slow beep) in presence of
warning messages. The acoustic signaling can be silenced by keeping the UP/
DOWN buttons pressed simultaneously.
DISABLE
ENABLE *
* Factory setting
ON ERRORS
It allows to enable or disable the acoustic signaling (fast beep) in case of manual
reset errors. The acoustic signaling can be silenced by keeping the UP/DOWN
buttons pressed simultaneously.
DISABLE
ENABLE *
* Factory setting
KEY BEEP
It allows to enable or disable the sound which is emitted when the UP/DOWN/
ENTER keys are pressed.
DISABLE
ENABLE *
* Factory setting
BACKLIGHT
LCD CONTRAST
KEY BEEP
BACKLIGHT
It allows to set the value of the backlight of the instrument’s display.
10%
30%
50% * * Factory setting
70%
90%
100%
LCD CONTRAST
It allows to adjust the intensity of the contrast of the instrument’s display.
1
2
3 * * Factory setting
4
5