EasyManua.ls Logo

Quickie puma 20 - User Manual

Quickie puma 20
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
9006395E
USER MANUAL
EN
Powered Wheelchair
Puma 20

Other manuals for Quickie puma 20

Questions and Answers

  • D
    Dana MannSep 1, 2025
    What does it mean when ON/OFF light flashes 8 times on Quickie puma 20 Wheelchair?
    • M
      mark70Sep 1, 2025
      If the ON/OFF light on your Quickie Wheelchair flashes 8 times, it indicates a fault in the power module. Check all connections and correct as necessary. If the fault signal persists, replace the power module.
  • H
    helen80Sep 12, 2025
    What does Right Lamp Short mean on my Quickie Wheelchair?
    • A
      Allison BowmanSep 12, 2025
      This error on your Quickie Wheelchair indicates a short in either of the Lamp Circuits. Check the lamps, cables, and connections to the control system. If the error persists after the above checks have been made, then the ISM may be defective.
  • J
    jill84Aug 30, 2025
    What does M2 Brake Error mean on my Quickie puma 20 Wheelchair?
    • W
      william34Aug 31, 2025
      This error on your Quickie Wheelchair indicates a problem in the solenoid brakes or their connections. Check the solenoid brakes, cables, and connections to the control system. If the error continues, the Power Module may be defective.
  • T
    Thomas MarshallSep 14, 2025
    What does Right Indicator Lamp Failed mean on my Quickie Wheelchair?
    • D
      Dr. Stephanie SharpSep 15, 2025
      This error on your Quickie Wheelchair indicates a failure in either of the Indicator Circuits, most likely an indicator bulb failure. Check the indicator bulbs, cables, and connections to the control system. If the error persists, the ISM may be defective.
  • P
    Peter CainSep 14, 2025
    What does Left Indicator Lamp Failed mean on my Quickie puma 20?
    • C
      Carla EllisonSep 14, 2025
      This error on your Quickie Wheelchair indicates a failure in either of the Indicator Circuits, most likely an indicator bulb failure. Check the indicator bulbs, cables, and connections to the control system. If the error persists, the ISM may be defective.
  • E
    Eric WalshSep 18, 2025
    What does Overtemp. (Actuators) mean on my Quickie puma 20 Wheelchair?
    • C
      Christopher CooperSep 18, 2025
      This error on your Quickie Wheelchair indicates that the ISM’s actuator circuitry has become too hot. Allow the ISM to cool down. If it frequently overheats, check the condition of the actuator motors and their connections. If the problem persists, contact your service agent.
  • B
    brownalexisSep 23, 2025
    What does 'User Switch detached' mean on my Quickie puma 20 Wheelchair?
    • W
      William NelsonSep 23, 2025
      This message on your Quickie Wheelchair indicates that the User Switch has become disconnected. Check all cables and connectors between the Omni and the User Switch.
  • C
    Cynthia BakerAug 27, 2025
    What to do if service indicator flashes once on Quickie puma 20?
    • J
      jameshensleyAug 27, 2025
      The service indicator flashing once on your Quickie Wheelchair usually indicates a 'STALL' timeout, likely due to user error. Place the joystick in neutral and try again.
  • D
    David MillsAug 26, 2025
    Why does my Quickie puma 20 display a 'High Battery' error?
    • A
      Adam WheelerAug 26, 2025
      This error on your Quickie Wheelchair appears when the battery voltage rises above 35V. Check the condition of the batteries and their connections to the control system. If the problem persists after checking, the Power Module may be defective.
  • D
    Daisy FordAug 25, 2025
    How to fix Joystick Error on Quickie puma 20 Wheelchair?
    • T
      Tiffany BrownAug 26, 2025
      The joystick error on your Quickie Wheelchair is often triggered if the joystick is not centered when the control system is powered on. Ensure the joystick is centered and restart the control system. If the error continues, the joystick or joystick module might be defective.

Summary

Safety

Temperature

Warns about potential burn hazards from hot motors and surfaces exposed to direct sunlight.

Moving parts

Advises users to avoid contact with moving parts to prevent serious injury or damage.

General description

User environment

Defines safe operating conditions, including acceptable slopes, road surfaces, and temperature limits.

Use of the wheelchair

Checking the wheelchair before use

Provides a pre-operation checklist for essential safety and functional checks.

Getting in and out of the wheelchair (transfer)

Guides users on safe techniques for transferring into and out of the wheelchair.

Driving the wheelchair

Covers fundamental driving operations, speed control, turning, braking, and slope navigation.

Obstacles

Explains how to safely overcome obstacles such as kerbs and steps.

Settings

Seating system

Details adjustable seating features for optimal support and comfort, referencing the seating system manual.

Centre of gravity setting

Describes adjustments to the center of gravity to optimize driving characteristics and stability.

Transport

The wheelchair as a passenger seat in a car with straps

Details the approved methods and safety precautions for securing the wheelchair in a vehicle.

Maintenance

Troubleshooting

Technical specifications

Quickie puma 20 Specifications

General IconGeneral
TypePower Wheelchair
Weight Capacity300 lbs
Maximum Speed5 mph
Footrest StyleSwing-away
Seat Depth16 inches
Seat Height17" - 19"

Related product manuals