What does it mean when ON/OFF light flashes 8 times on Quickie puma 20 Wheelchair?
If the ON/OFF light on your Quickie Wheelchair flashes 8 times, it indicates a fault in the power module. Check all connections and correct as necessary. If the fault signal persists, replace the power module.
How to resolve Joystick Calibration Error on Quickie puma 20 Wheelchair?
This error on your Quickie Wheelchair indicates that the Joystick Calibration process was unsuccessful. Enter OBP and attempt calibration. If the error persists, the Joystick Module may be defective.
What does it mean when ON/OFF light flashes 9 times on Quickie puma 20?
If the ON/OFF light on your Quickie Wheelchair flashes 9 times, it indicates a communication fault in the Shark system. Check the connection and correct it if necessary. If the fault signal persists, replace the controller.
What does Latched Timeout mean on my Quickie puma 20 Wheelchair?
This error on your Quickie Wheelchair occurs when the control system detects that the programmed Latched Timeout time has been exceeded. Cycle the power and initiate Latched Mode. If the error persists, the Input Device may be defective.
What does 'Bad Settings' mean on my Quickie puma 20 and how do I fix it?
This error on your Quickie Wheelchair indicates incorrect or invalid program settings. Check all parameter settings and re-program the control system using the R-net PC Programmer.
What does Module Error mean on my Quickie puma 20 Wheelchair?
This error on your Quickie Wheelchair indicates a trip within a specific module. Check all cables and connections, then cycle the power.
What does System Error mean on my Quickie Wheelchair?
This error on your Quickie Wheelchair indicates a trip that can't be attributed to a specific module. Check all cables and connections, then cycle the power.
What does it mean if service indicator flashes twice and ON/OFF light flashes three times on Quickie puma 20?
If the service indicator flashes twice and the ON/OFF light flashes three times on your Quickie Wheelchair, it indicates a battery fault or a defective M1 motor. Check the batteries and cabling, charge or replace the batteries, and check the motor connections and cabling. If the problem persists, the M1 motor may need replacement.
Warns about potential burn hazards from hot motors and surfaces exposed to direct sunlight.
Advises users to avoid contact with moving parts to prevent serious injury or damage.
Defines safe operating conditions, including acceptable slopes, road surfaces, and temperature limits.
Provides a pre-operation checklist for essential safety and functional checks.
Guides users on safe techniques for transferring into and out of the wheelchair.
Covers fundamental driving operations, speed control, turning, braking, and slope navigation.
Explains how to safely overcome obstacles such as kerbs and steps.
Details adjustable seating features for optimal support and comfort, referencing the seating system manual.
Describes adjustments to the center of gravity to optimize driving characteristics and stability.
Details the approved methods and safety precautions for securing the wheelchair in a vehicle.
General| Type | Power Wheelchair |
|---|---|
| Weight Capacity | 300 lbs |
| Maximum Speed | 5 mph |
| Footrest Style | Swing-away |
| Seat Depth | 16 inches |
| Seat Height | 17" - 19" |
To Next Page
