Need help?Do you have a question about the Quickie argon and is the answer not in the manual?
General| Brand | Quickie |
|---|---|
| Model | argon |
| Category | Wheelchair |
| Language | English |
Guidelines for the intended use of the wheelchair and its limitations.
Describes the variety of fitting variants and modular design for users with limited mobility.
Detailed instructions for securing the wheelchair and occupant safely inside a vehicle.
Guidelines for correctly fitting and adjusting pelvic and upper torso restraint belts.
Instructions on how to attach and position tie-down restraints for secure wheelchair transport.
How to install and remove rear wheels using quick-release axles.
Description of the wheelchair's wheel lock system and factors affecting braking power.
Information on the suspension system's function and how to replace buffer elements.
Details on flipping up and tilting footplates to facilitate entry and exit.
Procedure for adjusting the footrest length and angle for optimal user comfort.
Step-by-step guide to adjusting the seat height using frame and castor adjustments.
How to adjust the castor fork for proper alignment and secure positioning.
Procedure for adjusting seat height using the castor connection and markings.
Steps to measure and adjust rear wheel alignment for parallel positioning.
Details on measuring and adjusting the rear wheelbase by moving camber parts.
Steps to adjust the backrest angle by lining up holes and tightening screws.
How to adjust the tension of the back-sling using straps.
Procedure for adjusting the backrest height to five different positions.
Detailed instructions for fitting, adjusting, removing, and changing the height-adjustable armrest.
How to adjust push handles using a quick-release lever for individual needs.
Instructions for folding down push handles when not in use.
Guidance on adjusting lap belt length and ensuring proper fit for user safety.
Procedure for slotting and adjusting anti-tip tubes for correct ground clearance.
How to adjust the tension of the seat sling by tightening screws.
Information on optional cylinders for adjusting seat depth.
Using optional cylinders to move backrest tubes for increased seat depth.
Daily checks recommended for users to identify potential defects before each use.
Regular checks and maintenance tasks for tyres, slings, brakes, and frame components.
Addresses common problems like pulling, wobbling, squeaking, and rattling with troubleshooting steps.
Table showing possible seat heights for Argon wheelchairs with different castor and frame configurations.
Seat height data for the Argon model with a fixed castor receiver.
Seat height data for the Argon model with an adjustable castor receiver.
To Next Page
