Quickie Xenon - Backrest and Push Handle Adjustments; Backrest Angle, Folding, and Sling

17
Options - Backrests
To adjust the back angle, please undo the Allen screw (1)
and remove it. Set the desired position and then refit the
screw in this position and tighten it to the given torque
(Fig. 32).
Folding backrest
To make it easier to transport the wheelchair, the top half
of the backrest can folded down.
To do this, press both levers (1) and fold the backrest
down. When folding the backrest back up, please make
sure that both sides are firmly interlocked (Fig. 33/34)
Adjustable back sling
The adjustable back
sling can be adjusted for tension by using several straps.
The back sling upholstery can be accessed from the
inside via an opening and can be padded to suit individual
tastes, (Fig.35).
Fig. 32
1
Fig. 33
Fig. 35
1
Fig. 34
1