6). If the codes are not cleared then an
"ERASE FAILURE!"
message will
appear. Press the
N
button to return to previous menu.
Viewing ECU Information
1). To view ECU Information.Use the
UP/DOWN
scroll buttons to select
ECU
Information
from the
Select Function
menu and press the
Y
button.
If the scan tool is not connected or no communication is established with
the vehicle yet, then refer to Reading Codes from 1 to 7 at Paragraph 3.l.
ECU Information
========================
VAG No.:06A906032TF
Component:
Bosch 1.815VT
0020
Coding: 0008570
Imp: 0000 WSC:000078
If there is no ECU Information available, a warning message shows on the
display.
2). Press the
N
button to return to previous menu.
Readiness Test
Important: The Readiness Test function is used to check the
Operations of the Emission System on OBD2 / EOBD compliant
vehicles. It is an excellent function to use prior go having a vehicle
inspected for compliance to an emissions program.
Select Function
=====================
1) Read Codes
2) Erase Codes
3) ECU Information
4) Readiness Test
To Next Page
Loading...
Need help?
General