Quicksilver Activ 505 Open User Manual

Quicksilver 505OP — General Informaon
9
Bilge pump
Anchor light
Navigaon lights
12. Navigaon Lights
Your boat comes equipped with navigaon lighng for use at night or in low visibility condions. Prior
to running at night, you must install the stern pole light into the socket located on the transom. There
are two switches, located at the helm switch panel, that control the navigaon lights. To turn on the
Navigaon lights, push the upper part of the second switch forward to illuminate the all around light
(white), and push the upper part of the third switch forward to illuminate the port (red), starboard
(green) bow lights showing other vessels that you are underway. To turn on the Anchor light, only
push the upper part of the second switch illuminang the all around light (white), leng other boaters
know that you are anchored at a given locaon.
The Internaonal Regulaons for Prevenng Collisions at
Sea (COLREG) and the rules of the road require that a
proper lookout be maintained at all mes and observance
of right of way be respected. Always be certain to have
sucient distance to stop or manoeuver if required to avoid
collisions.
Dash Switch Panel
112.5
o
Port Navigaon
Light (Red), visible 2NM
360
o
All Around Light
(White), visible 2NM
All around light stored in a seat
base
112.5
o
Stbd Navigaon
Light (Green), visible 2NM

Quicksilver Activ 505 Open Specifications

General

Brand	Quicksilver
Model	Activ 505 Open
Category	Boat
Language	English