All the electrical work must be done by qualified personnel according to relative wiring
regulation and this manual.
The power supply is type Y connection.If the supply cord is damaged,it must be replaced by
the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
g
g
Leakage circuit-breaker and air switch of correct capacity must be installed.the air switch
of 32A should be used in these models.
The plug must be accessible after the appliances have been positioned.
g
g
The rated voltage and the exclusive circuit must be used.
g
A air switch having a contact separation of at least 0.12inch in all poles should be fixed in fixed
g
wiring.
Notices for use
To Next Page
Loading...
Need help?
General
