ENGLISH
Cod. 2200780113 01 - Edition 10/2014 - 3
4.0 GENERAL SAFETY STANDARD
The appliance may be used only by specially trained and authorized personnel.
Any tampering with the machine or alterations not approved beforehand by the Manufacturer relieve the latter of responsibility for any
damage resulting from the above actions.
The removal of or tampering with the safety devices constitutes a violation of the European Standards on safety.
ALL WORK ON THE ELECTRIC PLANT, HOWEVER SLIGHT, MUST BE CARRIED OUT BY PROFESSIONALLY SKILLED PERSONNEL.
5.0 DESCRIPTION OF DANGER SIGNALS
1) Dangerous electricvoltage
2) Air not fit for breathing
6.0 DANGER ZONES
6.1 DANGER ZONES
Risks present on the whole machine
7.0 SAFETY DEVICES
7.1 SAFETY DEVICES