To Next PageTo Next Page
Need help?Do you have a question about the Quincy Compressor QR-25 Series and is the answer not in the manual?
General| Model | QR-25 Series |
|---|---|
| Maximum Pressure | 175 psi |
| Pump Material | Cast Iron |
| Horsepower | 25 HP |
| Voltage | 230V |
| Phase | 3 |
| Weight | Approximately 1, 200 lbs (varies by configuration) |
Defines safety levels (Danger, Warning, Caution) and lists general precautions.
Provides an overview of the QR-25 Series compressors.
Explains single and two-stage compressor operation.
Lists model, stroke, bore, RPM range, and max pressure.
Steps for inspecting compressor equipment upon receipt.
Electrical installation standards and precautions.
Proper mounting techniques for safe operation and longevity.
Steps to perform before connecting power to the unit.
Procedures for starting and monitoring the compressor.
Procedures for safely shutting down the compressor for service.
Importance of proper alignment and belt tension.
Procedure to adjust the unload pressure setting.
Procedure to adjust the differential pressure setting.
Provides factors to adjust capacity based on altitude.
Diagram showing decal placement on a horizontal receiver unit.
Diagram showing decal placement on a vertical receiver unit.
