Section VII - Compressor Fluids
Quincy Compressor-QSI
®
93
QuinSyn PG
Eective on orders entered on June 1, 2000 and later,
Quincy’s factory ll uid changed from QuinSyn
to QuinSyn PG. Orders placed prior to June 1, 2000
QuinSyn PG is a custom blended polyalklene glycol/ester
8,000 hour life under normal operating conditions (exact
life is rated at 8,000 hours or one year, whichever occurs
Typical Properties of QuinSyn PG ISO 46
Applications
is best suited for applications where high humidity exists
and the machine cannot be shut down to drain water from
Disposal
from condensate will require those separators designed to
-
-
Fluid Analysis Program
2,000 hours because of the superior quality and forgiving
-
ranty with QuinSyn PG requires 2,000 hour sampling as a
NOTICE!
To maintain warranty compliance, uid samples
of QuinSyn PG must be sent to Quincy Compres-
sor Fluid Analysis a minimum of every 2,000
hours.
-
not be condemned on water percentage nor antioxidants
but will be condemned on low barium and high TAN
-
tor, therefore we have set low limits for this additive (see
To Next Page
Loading...
Need help?
General
