13
FM Dump by Z
QPrint FM starts the FM Dump. In the external display the start-Z-number appears, for instance:
0001
Use the keys
• F1 to select the last position (shift to right) and quit the menu
• F2 to move the cursor to the left (blink)
• F3 to move the cursor to the right (blink)
• F4 to confirm the setting and select the next cursor position (shift to left)
If finished, the start-Z-Number is confirmed and in the display appears the end-Z-number, for
instance:
0014
Follow the same procedure to enter the end-Z-number. If finished, the end-Z-Number is confirmed
and the printout of the FM dump starts.
FM Dump by date
QPrint FM starts the FM Dump. In the external display the start-date appears, for instance:
10122007
Use the keys
• F1 to select the last position (shift to right) and quit the menu
• F2 to move the cursor to the left (blink)
• F3 to move the cursor to the right (blink)
• F4 to confirm the setting and select the next cursor position (shift to left)
If finished, the start-date is confirmed and in the display appears the end-date, for instance:
10122007
Follow the same procedure to enter the end-date. If finished, the end-date is confirmed and the
printout of the FM dump starts.
Info QPrint
QPrint start the printout of the version info, for instance:
=====================
P:QF070904FIR_09
C:QF070904FIR_09
D:00-LT1320-WE
RAM: 384k
MAC:00 16 4B 01 00 04
FM:Venez (#09)
=====================
To Next Page