3.9 Tendering in Foreign Currency
In addition to the local currency the QTouch 15 can operate with different foreign currencies, which
are saved separately in the reports.
Just press the “FCE” key instead of Subtotal to convert the
total amount in a pre-programmed foreign currency. On the
display the new amount in foreign currency will now
appear. Select a tender as described above and the
change amount will be calculated either in local or in
foreign currency, depending on programming.
Example: 1.00 Dollar CASH payment:
3.10 Receipt On/Off and Receipt Copy
If a receipt does not have to be printed at all, you may switch off the receipt printer by pressing the
“Receipt on/off” key. To reactivate the printer, simply press the “Receipt on/off” key again. In any
case you can print a receipt copy by pressing the “Sub total” key after a sale.
3.11 Time and Date
If all receipts are closed, you can view the current time and date in the display by pressing the
“Multiplication” key. Depending on the programming this information will be shown automatically
after a certain time has passed. All models with graphical display can also show a programmable
customer logo.
3.12 No Sale / Open Drawer
The No Sale function allows you to open the cash drawer
without registering a sale. You can check the number of
times a No Sale function has been performed in the
reports.
The “No sale” key can also be used as a reference key.
To print a specific reference number on a receipt, enter the
reference number and press the “No sale” key.
Example: Enter reference number 123:
No
sale
3
To Next Page
Loading...
Need help?
General
