button to delete the selected image. Press to exit the 4 x 4 image
display mode.
On the remote control, the “RECALL ”,“ ”, “ ”, “ ”, “ ”, “ ” and “TEXT”
button can do the operation. Press “EXIT” to exit the 4 x 4 image display
mode.
INSTALLING VISUALIZER SOFTWARE
This function is to snap and display images with the USB interface, which
includes displaying static and dynamic pictures, snapping dynamic images and
playback the dynamic images with the Windows Media Player or its own
player.
A. Insert the CD-ROM that comes with the visualizer into the CD-ROM drive.
If Autorun is enabled on your system, then the Software Setup window will
be displayed automatically as below.
If it does not start automatically, after inserting the CD-ROM, Click [Start]
[My Computer], and double click (the CD-ROM drive letter might
be different in different computer systems), and then the above screen will
appear immediately.
B. Click the Install Capture Program button to install the program that
captures images in the AVI or JPG format.
C. Click the Install Code-Writing Program button to install Code-Writing
Program.
D. After the installation is finished, then click the Exit button to exit the
Software Setup window.
E. Shut down your computer when prompted in order for the changes to take
effect.
F. Use the USB2.0 cable provided to connect your computer to the visualizer
before your computer is restarted.
USB PORT
The USB port can be used to store still images from the visualizer in a
computer. Connect the visualizer to your computer with the supplied USB
cable. The visualizer software is available on the supplied CD-ROM.
To Next Page
Loading...