The ProBox sends the tracking data by means of GMS/GPRS. A SIM card
is required. Make sure PIN code has been turned off. You may have to
insert the SIM card into a mobile phone to turn off PIN code.
The card is inserted like shown
below. Make sure the card fits
properly into the socket when
socket is closed.
Make sure that the card is
locked properly in both sites
when you push the lid up.
Use a Philips screwdriver
to remove two screws in
the back and remove the
screws before opening
the cabinet.
When SIM card is
inserted, the cabinet is
assembled and screws
are secured firmly.
PROBOX 3100
1
To Next Page
Loading...