19
E
N
G
L
I
S
H
FLAMINGO AS BATHING
SEAT
With suction cups mounted underneath the seat,
the Flamingo is easy to mount in the bathtub.
* Dismount the seat (see page 15)
* Remove the mountings for commode pan, if
any
1) Mount the four suction cups (A) below the
seat
2) Place the Flamingo seat in the bath tub,
with the back against the bath tub wall, see
drawing (B)
Pour water into the bath tub, but stop when the
water reaches the childs hip.
Check the water temperature before
placing the child, make sure it is not more
than 37°.
Always keep an eye on the child in the
bath tub.
Check, every 20 min., that the seat is still
securely placed in the bath tub.
GB
GB
B
1
A
B
2
To Next Page
Loading...
