Getting Started Manual 7
2. DETAILED INSTALLATION INSTRUCTIONS
Chapter 2 contains detailed instructions for installing the soft-
ware on your PC and for connecting the BL1810 to your PC in
order to run sample programs.
2.1 Software Installation
You will need approximately 200 megabytes of free space on your hard disk for a com-
plete installation. The software can be installed on your C drive or any other convenient
drive.
Insert the Dynamic C CD-ROM in the drive on your PC. If autorun is enabled, the CD
installation will begin automatically.
If autorun is disabled or the installation otherwise does not start, use the Windows
Start | Run menu or Windows Disk Explorer to launch SETUP.EXE from the root folder
of the CD-ROM.
The installation program will guide you through the installation process.
To Next Page
Loading...
