Getting Started Manual 1
1. INTRODUCTION
The Rabbit
®
2000 is a new and powerful microprocessor. Both
hardware and software design are easy with the Rabbit.
This Development Kit has the essentials that you need to design
your own a microprocessor-based system, and includes a com-
plete software development system (Dynamic C). This kit con-
tains a powerful single-board computer (the BL1810). With this
kit you will be able to write and test complex software. You will
be able to prototype circuits that interface to a Rabbit 2000
microprocessor.
1.1 Development Kit Contents
The Rabbit 2000 Development Kit contains the following items:
• BL1810 single-board computer.
• Prototyping Board.
• AC adapter, 12 V DC, 1 A. (Included only with Development Kits sold for the North
American market. A header plug leading to bare leads is provided to allow overseas
users to connect their own power supply with a DC output of 7.5–25 V.)
NOTE: The linear voltage regulator becomes rather hot for voltages above 15 V.
• 10-pin header to DE9 programming cable with integrated level-matching circuitry.
• Dynamic C CD-ROM, with complete product documentation on disk.
• This Getting Started manual.
• A bag of accessory parts for use on the Prototyping Board.
• Screwdriver.
• Rabbit 2000 Processor Easy Reference poster.
• Registration card.
To Next Page
Loading...
