Getting Started Manual 15
2.6 Where Do I Go From Here?
If everything appears to be working, we recommend the following sequence of action:
1. Run all of the sample programs described in Chapter 3 to get a basic familiarity with
Dynamic C and the BL1810’s capabilities.
2. For further development, refer to the Jackrabbit (BL1800) User’s Manual for details
of the board’s hardware components.
A documentation icon should have been installed on your workstation’s desktop; click
on it to reach the documentation menu. You can create a new desktop icon that points to
default.htm in the docs folder in the Dynamic C installation folder.
3. For advanced development topics, refer to the Dynamic C User’s Manual, also in the
online documentation set.
2.6.1 Technical Support
NOTE: If you purchased your Rabbit 2000 Development Kit through a distributor or
through a Rabbit Semiconductor partner, contact the distributor or partner first for
technical support.
If there are any problems at this point:
• Use the Dynamic C Help menu to get further assistance with Dynamic C.
• Check the Z-World/Rabbit Semiconductor Technical Bulletin Board at
www.zworld.com/support/bb/.
• Use the Technical Support e-mail form at www.zworld.com/support/questionSubmit.shtml.
To Next Page
Loading...
