Racktivity PM0816-01 - Manual IP Assignment

To Next Page

To Previous Page

2100 Seaport Blvd., Suite 400, Redwood City 94063, USA – www.racktivity.com v 2013.11.18

Manual IP Address Assignment

Obtain the correct IP address, standard gateway, DNS Server IP and subnet mask from your

network administrator.

1. Press the MENU button until the Main menu appears, select Ethernet or Network using the

UP and DOWN buttons and press OK.

2. Within the Ethernet or Network menu, select DHCP (on) and press OK until DHCP (off)

appears.

3. Select SET IP-ADDRESS and press OK to change the settings (when navigating the menus, the

value for that setting is shown in yellow at the bottom of the OLED).

4. Use the UP and DOWN buttons to change the currently selected value and press OK to select

the next value. When holding the UP and DOWN buttons changing the values speeds up.

When ready press MENU to return to the Ethernet or Network menu.

5. Repeat the last 2 steps for the Subnet mask, Std Gateway and DNS Server settings.

6. On a computer in the same network, use a browser to open the chosen IP-address, for

example http://192.168.14.250

7. When browsing to the Web Portal, a popup appears requesting a username and password.

The default values are:

Password: 1234