© 2011 Racktivity Inc. 23/25
2100 Seaport Blvd., Suite 400, Redwood City 94063, USA – www.racktivity.com v 2013.11.18
Determine Your IP Address
To determine the IP address currently used by the PDU, first choose your firmware version:
1. Press MENU until the Main menu appears, select Network or Ethernet using UP and DOWN
and press OK.
2. Use UP and DOWN to select Current IP-Address. The current IP-address is shown in yellow at
the bottom of the OLED
Firmware Update
To obtain the necessary software to update your PDU's firmware, please contact Racktivity
Support.
1. Make sure that your computer and the PDU are on the same network and fully functional
2. Unpack the update package
3. Open the software tool "Racktivity Ethernet Bootloader.exe"
4. Use the "File" button to select the .cry file that came with the update package
5. Fill in the appropriate IP address and login credentials of the designated PDU
6. Press "Update firmware" to start the update
7. The update has successfully completed when "Programming completed / Exit bootloader" is
shown (the update takes a few minutes)
Latest version
The latest available firmware version for the PM0816-01 is v1.01.
To Next Page
Loading...