To Next PageTo Next Page
Need help?Do you have a question about the RADEMACHER Troll Comfort and is the answer not in the manual?
Details the proper and intended applications for the Troll Comfort and Troll Comfort 3D devices.
Outlines prohibited uses and potential risks associated with misuse of the device.
Specifies the necessity for qualified electricians for connection and commissioning.
Details the power supply and input connections for the Troll Comfort 3D.
Details the power supply and input connections for the Troll Comfort.
Information on connecting motors and external controllers via inputs.
Explains the primary function of automating roller shutter operations.
Details how to manually control the connected tubular motor at any time.
Describes the capability to control external lights or appliances.
Details using external inputs for enhanced control and automation.
Details the blockage detection feature for motor protection in Troll Comfort.
Details automatic modes, switching times, dusk, sun, dawn, and random functions.
Covers end point setting, button lock, Venetian blind mode, and jog mode.
Details wind, rain functions, light control, rotation reversal, and external inputs.
Details power supply requirements and specifications for external inputs.
Technical parameters related to motor rotation direction control.
Default settings for automatic mode, switching times, and motor functions.
Details the device's power reserve and how data is retained after power failures.
Crucial safety warnings regarding electric shock, overloading, and component damage.
Safety advice on using correct housings and preventing damage from incorrect input connections.
Instructions on configuring motor end points before final electrical connection.
Guidance on connecting multiple motors in parallel.
Specifies conditions for blockage detection functionality.
Explains the independent configuration of inputs E1 and E2.
Step-by-step instructions for performing the electrical connection.
Guidance on connecting the SET cord from Rademacher motors for proper operation.
Instructions and specifications for connecting and controlling a lamp or appliance.
Highlights that no neutral terminal connection is needed for the Troll Comfort 3D.
Steps for installing the operating unit and frame after electrical connection.
Steps to open menus, select options, and confirm settings.
How to confirm settings and return to the standard display or previous menu.
Covers initial steps: time, date, year, and postcode entry in the wizard.
Guides setting opening and closing times, including switching time modes.
Covers final confirmation of settings and the device's readiness for operation.
Step-by-step guide for manual opening, stopping, and closing of the roller shutter.
Guides on displaying, setting, and automatically moving the shutter to a target position.
Overview of menus for Automatic mode, Switching times, Dusk, Sun, Dawn, Rain, Wind.
Overview of menus for Motor run time, Ventilation position, Blockage detection, Venetian blind mode.
Overview of menus for Rotation direction, Light function, and End points.
Indicates when automatic mode is active or deactivated and its implications.
Steps to activate or deactivate automatic mode via Menu 1.
Method to switch automatic mode directly from the standard display.
Steps to activate blockage detection and select the motor type.
Guides setting sensitivity, selecting motor type, and configuring reversing function.
General| Mounting | Flush-mounted |
|---|---|
| Radio Frequency | 434.5 MHz |
| Range (indoors) | Up to 30 m |
| Range (outdoors) | 100 m |
| Protection Class | IP20 |
| Power Supply | 230 V/50 Hz |
| Operating Temperature | 0°C to 50°C |
