Bassbone V2 Preamp
Radial Engineering Ltd.
3
14. BLEND: Recessed switch turns on
both channels for instruments with dual
electric/acoustic pickup systems. Push the
switch in to mix channels-1 and 2 or out for
normal use. When pushed in the channel
SELECT footswitch is deactivated.
15. BOOST/MUTE: Recessed switch
assigns the BOOST footswitch to either
the power booster or mute.
16. OUT: ¼” instrument output jack
connects to your bass amplifi er.
17. TUNER OUT: ¼” output for a tuner.
Always on for tuning on the fl y or used in
conjunction with the mute footswitch for
silent tuning.
18. SEND & RECV: Send and receive ¼”
jacks for the effects loop.
19. 180° (XLR): Recessed switch
reverses pins-2 and 3 at the balanced
XLR output to phase align sound with PA
or to reduce feedback.
20. BALANCED OUT: Direct XLR output
sends the ‘post-EQ’ Bassbone sound to
the PA or recording console.
21. LIFT: Recessed ground lift switch
disconnects pin-1 on the XLR output to
help eliminate hum and buzz caused by
ground loops.
22. 15VDC: Connection for the Radial
15VDC/400mA power supply (included).
23. CABLE CLAMP: Prevents accidental
power disconnection by locking down the
AC adapter cable.
15 161411 12 13
2217 18 19 20 21
23
To Next Page
Loading...
