Radial Engineering Trim Two - Applications; Music Playback with Laptop;Tablet; CD Player in Restaurant

Radial Engineering Ltd. Trim-Two™ Stereo Direct Box User Guide
6
APPLICATIONS
The following are some common setups that you can enjoy using the Trim-Two:
Stereo RCA
Mono
Mono
Ceiling Mounted
Speakers
Outdoor Patio
Speakers
XLR
CD player in restaurant - Connect the CD player’s RCA output to the Trim-Two using standard RCA cables. Activate the
mono sum to use the Trim-Two as a distribution point for two ampli ers. Send the output to ceiling speakers and outdoor
speakers that are powered separately. Note that CD players typically do not have a volume control, so they play at full
output all of the time. If you hear distortion, reduce the Trim-Two level control and adjust the power amp to compensate.
Music playback with a laptop computer or tablet - Simply connect the output from your laptop using a 3.5mm stereo
cable to the Trim-Two. Connect the XLRs to the PA system. Set the volume on the Trim-Two to 2 o’clock and adjust the
output level from your laptop to suit.