radiance TAR-6 - User Manual

OWNER & OPERATOR
INSTRUCTION MANUAL
For service contact:
German Knife Inc.
1-800-500-3519
www.turboairinc.com
Model No.
www.turboairinc.com
IMPORTANT SAFETY NOTICE
THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL GAS EQUIPMENT, WHO SHOULD
PERFORM THE INITIAL FIELD START-UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL.
POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS
DETECTED. THIS INFORMATION CAN BE OBTAINED FROM THE LOCAL GAS SUPPLIER.
IMPORTANT
In the event a gas odor is detected, shut down units at main shutoff valve and contact the local gas company or gas supplier for service.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or other appliance.
WARNING
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation,
operating and maintenance instructions thoroughly before installing or servicing this equipment.
TAR-6 / TAR-36G / TAR-36RB
TAR-4 / TAR-24G / TAR-24RB
TARG-2B24G / TARG-24G2B
TARG-4B12G / TARG-12G4B
TARG-6B12G / TARG-12G6B
TAR-8
TARG-2B36G / TARG-36G2B
TARG-4B24G / TARG-24G4B
TARG-8B12G / TARG-12G8B
TAR-10
TARG-6B24G / TARG-24G6B
TARG-4B36G / TARG-36G4B
TARG-2B48G / TARG-48G2B

Summary

Important Safety Notice

General Safety Precautions

Covers gas leak detection, safe material storage, and installation warnings.

Installation and Operation Instructions

General Installation Requirements

Gas shut-off valve, pressure regulator, and system testing requirements.

Rating Plate Information

Details found on the rating plate for identification and specifications.

Clearance and Assembly

Required clearances from construction and high shelf assembly instructions.

Leveling and Ventilation

Procedures for leveling the unit and ensuring proper air supply.

Gas Connection and Regulator

Requirements for gas line size, shut-off valve, and pressure regulator installation.

Connection Types and Standards

Specifics for 60" ranges and guidelines for rigid/flexible connections.

Initial Pilot Lighting

Pilot Lighting Safety and Procedures

Safety precautions and step-by-step guides for lighting pilots on burners and ovens.

Final Preparation

Leak Detection and Section Preparation

Procedures for checking leaks and preparing top sections, griddles, hot tops, and ovens.

Cleaning and Maintenance

Daily Cleaning Procedures

Daily routines for cleaning open burners, griddles, hot tops, and ovens.

Periodic and Stainless Steel Cleaning

Guidelines for periodic checks, lubrication, and cleaning stainless steel surfaces.

Limited Warranty

Warranty Claim Process

Information and requirements for submitting a warranty claim.

Covered Products and Exclusions

Lists products under warranty and details what is not covered.

radiance TAR-6 Specifications

General

Brand	radiance
Model	TAR-6
Category	Stove
Language	English